ProBoat UL-19 30-Inch Hydroplane RTR


Novo produto

Sob Encomenda

ProBoat UL-19 30-Inch Hydroplane RTR

Mais detalhes

414,63 €

  • ProBoat UL-19 30-Inch Hydroplane RTR

    Fiberglass hull with matching canopy and removable vertical fins
    Powerful waterproof electronics
    Dynamite 2000Kv brushless motor
    Spektrum DX2E 2.4GHz transmitter
    Stainless steel two-blade propeller
    Interference-free connection
    Aluminum adjustable propeller strut
    Stainless steel turn fin
    Aluminum break-away rudder
    Length:30 in (762mm)Beam:16 in (406.4mm)Motor Size:3650 6 Pole Marine Motor 2000KvWeight:5 lbs (2300g)Speed:45+Radio:DX2ESpeed Control:120AHull Material:FiberglassTrim Scheme Colors:Blue and YellowProp Size:1.7 x 1.6Hull Type:HydroplaneBattery:(2) 7.4V 5000MAH 2S 50C LiPo, with EC5 connectorKit/RTR:RTRScale:30-inchDrive System:Flex ShaftExperience Level:IntermediateRecommended Environment:Outdoor
    What"s in the box?
    (1) UL-19 Hydroplane Boat
    (1) Spektrum™ DX2E 2.4GHz Transmitter
    (1) Spektrum SR310 DSMR 3-Channel Receiver
    (1) Dynamite® 120A Marine Brushless Marine 2-6S ESC
    (1) Dynamite Marine Brushless Motor, 2000Kv
    (1) Spektrum 3KG Servo
    (1) User Manual

    You asked for it and now it"s here-the ready-to-run Pro Boat® UL-19 30-inch Brushless Hydroplane. Its design is ultra sleek, with no turbine housing or rear spoiler. And boy is it fast-you can cruise up to speeds of 50+ mph on 6S power thanks to the 6 pole water-cooled motor and 120A ESC. A waterproof Spektrum™ 3KG servo lets you take corners at full speed without fear! On top of that, the UL-19, which is built to NAMBA race specifications, comes equipped with all the aluminum running gear you need and a stainless steel turn fin. This is adrenaline-pumping, heart-pounding action you won"t soon forget.

    Lightweight, durable fiberglass hull with matching canopy and removable vertical fins
    Because the hull is lightweight and durable, you can push this hydroplane to max speeds in race condition waters. The canopy, like the hull, is constructed of hand-laid fiberglass. The vertical fins are removable and replaceable. In case of a bad crash, they will simply break away without damaging the hull.

    Extreme power from waterproof electronics
    The UL-19 uses a Dynamite® water-cooled 120A, 2-6S ESC that can handle more amperage than needed to run the boat with authority and speed. The new 2000Kv 6-Pole motor features a large rotor that greatly increases motor torque.

    Stainless steel two-blade propeller
    An aggressive boat like the UL-19 deserves an equally aggressive two-blade propeller. The UL-19"s propeller lets you take full advantage of the hull"s performance. It features a high-pitch, high rake stainless steel propeller that produces a tight thrust cone that results in better propulsion and higher speeds that won"t overload the electronics. You"ll be able to reach speeds on 4S that could only be reached on 6S by other boats.

    Interference-free connection
    The included Spektrum DX2E DSMR® 2.4GHz transmitter will provide a clear, precise connection while the hydroplane is on the water.

    Aluminum adjustable propeller strut
    Use the aluminum adjustable propeller strut to tune the boat to various water conditions, from glass smooth to windy and choppy. The square-bottom propeller strut allows more precise adjustments by acting similar to a trim tab usually found on Deep-V boats.

    Aluminum break-away rudder
    The aluminum rudder features a break-away design that will safeguard the transom if the hydroplane hits an immovable object on the water or runs ashore.

    Stainless steel turn fin
    The stainless steel turn fin will keep the boat glued to the water whether you"re going straight or full throttle through a turn.